Forum Widgets
Latest Discussions
Looking for a solution to build Mobile wallet App on Azure Stack across 6 regions
Hello Team, We are seeking a solution from Microsoft to provide technical documentation and commercial details for building a mobile app across six regions using Azure Private Cloud. We require urgent assistance and consultation with the Azure technical team.
Error Depoloying Azure Stack?
I keep getting this message when I try to deploy azure stack Any idea would be appreciated thanks Exception Type 'SetAzureStackHostsPreConfiguration' of Role 'HostNetwork' raised an exception: Stopping execution after intent provisioning failed with [ ProvisioningFailed ] for intent "compute_management" on host "NODE1". Configuration Status: Failed Compute: True Management: True Storage: False at TestNetworkAtcIntentStatus, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Roles\HostNetwork\HostNetwork.psm1: line 1714 at ConfigureHostAdaptersWithNetworkAtcForHosts, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Roles\HostNetwork\HostNetwork.psm1: line 2183 at Set-HostAdaptersWithNetworkAtc, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Roles\HostNetwork\HostNetwork.psm1: line 2315 at Invoke-ConfigureHostAdaptersWithNetworkAtc<Process>, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Roles\HostNetwork\HostNetwork.psm1: line 2586 at Invoke-ConfigureAzureStackHostNetworkingWithATC, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Roles\HostNetwork\HostNetwork.psm1: line 3781 at Invoke-SetAzureStackHostsPreConfiguration, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Roles\HostNetwork\HostNetwork.psm1: line 3916 at SetAzureStackHostsPreConfiguration, C:\NugetStore\Microsoft.AS.Network.Deploy.HostNetwork.1.2411.1.8\content\Powershell\Classes\HostNetwork\HostNetwork.psm1: line 66 at <ScriptBlock>, C:\CloudDeployment\ECEngine\InvokeInterfaceInternal.psm1: line 139 at Invoke-EceInterfaceInternal, C:\CloudDeployment\ECEngine\InvokeInterfaceInternal.psm1: line 134 at <ScriptBlock>, <No file>: line 33
Azure Stack HCI 23h2 upgrade & Azure local Resource
Good evening, After upgrading from 22H2 to 23H2, we encountered an issue where the Azure Local resource in the Azure portal appears as "not connected recently." Additionally, we are not seeing the "Your cluster can be upgraded to the latest version" option, likely due to this connection issue. Despite successful connectivity tests and extensive troubleshooting, the resource remains unsynchronised with Azure. As a result, we tried deleting the Azure Local resource and re-registering the nodes. Now, while both nodes are successfully registered and connected to Azure and passing the Invoke-AzStackHciUpgradeValidation , we are unable to find a way to re-register the Azure Local resource to proceed with the "Install the solution upgrade via Azure portal" step. The only option I see is going through the "Deploy Azure Local" process in Azure Arc. However, I believe this would overwrite existing settings and VMs, causing significant disruption—especially since this is a production cluster upgraded from 22H2. Is there a way to re-register the cluster and restore the Azure Local resource using existing settings, so we can proceed with deploying the rest of the solution upgrade via the Azure portal? Any guidance would be greatly appreciated
SMB Bandwidth Limit for VM Live Migration Category.
Hi All, PART 1: Need help to understand the Math or how to calculate the VM Live Migration -SMB Bandwidth Limit? My Environment Details: Considering RDMA capable - Dual NICs of 25GBPS Network model of disaggregated, with Storage VLAN1 and Storage VLAN 2 for storage traffic. (No Teaming for Storage adapters). Considering the above Hardware specs what should be the VM Live migration -bandwidth be? I have seen this article Optimizing Hyper-V Live Migrations on an Hyperconverged Infrastructure | Microsoft Community Hub. However, it says a limit of 750mbps. I understand that this is for 10gbps Dual NICs. (Manual Set values and no using Overrides via Network ATC). If there is a similar optimized value for 25gbps NICS, what is the optimized value and how is it calculated? I see the below table in Microsoft Docs but understand that this is for Converged Model and not for disaggregated. Is there any resources like this for Disaggregated Network Design? Part 2: We have tried to do this via Global overrides to maintain a symmetry across the Cluster. We have used $Globaloverride.SMBVMlivemigrationlimit in GB. (We did Test out 4, 5,5 GB values) We cannot add in Decimal values like 3.25 or 3.5 GB here. It's taking only whole numbers. How do we tackle this? Is this Ideal way to doing it or any better procedure exists without the hassle of manually doing it on all Nodes and ATC Them defaulting it to its own values? And when we do a clean 23H2 Installation Cloud Based, we see the below value: How is this calculated? Part 3: Is validate-dcb a Valid procedure to validate the 23H2 Clusters? If Yes, are there any guidelines to tweak the tests in DCB validate Module to suit our requirements? As per the code, can see that the VM Speed is set to 10gig and I have 25gig NIC cards? Any Knowledge articles that can help with this or any update from Microsoft on validating the 23H2 Clusters? Sorry for making the Post very long but have been fighting demons of questions related to the above topics in my mind. Any help is greatly Appreciated. Thanks in advance.Azure Stack HCI Cluster network name changes from "ClusterNetwork1" to "Unused:ClusterNetwork1"
I have configured Azure Stack HCI Stretched Cluster with Network ATC. Strange behaviour i am noticing is with naming of Cluster Network(screenshot 1). e.g. current name is "Cluster Network1", gets changed to "Unused: Cluster Network1". Also Live Migration settings(screenshot 2) keep selecting multiple adaptors by itself even i uncheck all and only keep "LM" on top an checked. Any suggestions or fix to this.
HCI Stack 23H2 WMI - RPC Server is Unavailable
After updating to Solution 10.2405.2.7 I am unable to manage my cluster through the failover manager and unable to run cluster validations due to the error RPC Server is unavailable. I have restarted the nodes, confirmed firewall rules are allowing WMI and RPC, and confirmed DNS. Azure and WAC are reporting no issues with the cluster, I am worried about applying the next solution in case this WMI issue will cause issues with the updates. Any guidance to resolve this fault would be much appreciatedIssues with Azure stack HCI 23H2 and and NVMe Drives 5520 Series
We recently purchased a Lenovo MX630 V3 Integrated System for Azure Stack HCI 23H2 deployment with 16 x 5520 series NVMe drives (Lenovo NVMe part number is 4XB7A13943/SSDPF2KX076T1O and the server model is 7D6U). We are using version 10.2408.0.29 25398.1085 of Azure Stack HCI. In the past few days, we have encountered some weird issues. The storage cluster degraded because the physical disks keep going to "Lost Communication," causing the storage volume to go into detached mode. We are using firmware version Lenovo NVMe 9CV10450, which is approved by Lenovo. I see that the newer driver is 9CV10490, and I was wondering if anyone had a similar experience with these drives and if the August update fixed it. The reason I ask is that using Solidigm driver/firmware is not supported by Lenovo. So far, we have replaced one disk, but when I observed the last problem, it seemed to fix itself.Looking for a solution to build Mobile wallet App on Azure Stack across 6 regions
Hello Team, We are seeking a solution from Microsoft to provide technical documentation and commercial details for building a mobile app across six regions using Azure Private Cloud. We require urgent assistance and consultation with the Azure technical team.
