Forum Widgets
Latest Discussions
Designing and developing for Unified Namespaces
I apologize if I am posting in the incorrect community. I would like to know if anyone has developed a Unified Namespace architecture and solution within Azure for IIOT without using third-party middleware such as ignition, high-byte, or HiveMQ. I am currently looking to use Azure IOT and ADF and Dynamics 365 as the ERP and MES.
IOT Central data export destination on waiting
Hello. I have successfully created a demo sensor in iot central and now I would like to connect it to my service bus queue. I went to data export tab and create a new destination using the connection strings of my queue, it seemed ok but the destination is on "waiting" state since 10 hours. Is it normal? Can I check anything? Thanks Gianpaolo
Enable ipv6 for azure-iot-edge user-defined network
We have a Raspberry Pi that we use as an edge device. One of our modules needs to communicate over IPv6 in the local network. Since the module is automatically connected to the "azure-iot-edge" network in Docker, I'd like a method to easily enable IPv6 on this network. To achieve this, I tried following the steps described in the IPv6Configuration documentation. For me, this worked only for the default bridge network but not for the "azure-iot-edge" network. I also checked the networking documentation and attempted to configure the network using the mentioned /etc/aziot/edged/config.yaml file. However, this file did not exist initially, and when I manually added it, it seemed to be completely ignored. The only way I have been able to get IPv6 to work for the "azure-iot-edge" network so far is by completely removing it and manually recreating it with IPv6 enabled. This also required me to manually disconnect and later reconnect all modules. This does not feel like the correct way to achieve this. I would assume there should be a way to configure this either from the module definition in the IoT Hub or by adding some configuration on the device.can't use create_from_edge_environment with proxy options - client doesn't connect to azure iot hub
Hello, I am trying to configure a client connection towards azure iot hub from a module. I've tried creating the client with create_from_edge_environment method and I get the following error: Traceback (most recent call last): File "/usr/local/lib/python3.10/site-packages/azure/iot/device/common/mqtt_transport.py", line 391, in connect rc = self._mqtt_client.connect( File "/usr/local/lib/python3.10/site-packages/paho/mqtt/client.py", line 914, in connect return self.reconnect() File "/usr/local/lib/python3.10/site-packages/paho/mqtt/client.py", line 1044, in reconnect sock = self._create_socket_connection() File "/usr/local/lib/python3.10/site-packages/paho/mqtt/client.py", line 3683, in _create_socket_connection return socks.create_connection(addr, timeout=self._connect_timeout, source_address=source, **proxy) File "/usr/local/lib/python3.10/site-packages/socks.py", line 209, in create_connection raise err File "/usr/local/lib/python3.10/site-packages/socks.py", line 199, in create_connection sock.connect((remote_host, remote_port)) File "/usr/local/lib/python3.10/site-packages/socks.py", line 47, in wrapper return function(*args, **kwargs) File "/usr/local/lib/python3.10/site-packages/socks.py", line 814, in connect raise GeneralProxyError("Socket error", error) socks.GeneralProxyError: Socket error: 407: Proxy Authentication Required This problem doesn't appear if I create the client using create_from_connection_string method. This adds complexity to my script and I would like to use create_from_edge_environment method. Does anybody have any insights on why one method works and the other doesn't? Thanks!
unable to deploy modules other than edgeAgen & edgeHub to my device
Hi, I have my device hooked up to IoT Edge account and have two modules built and pushed to my ACR account. I've added them the modules to my device under IoT Edge Modules. I configured ther ACR name, address, username & password and there's no apparent error visible. The DESIRED STATUS for both modules is set to running. under Settings, i can see that the Image URI & the Module name has been set as well, yet my device does not receive the modules. When I execute "iotedge list", I only see the edgeAgent & the edgeHub modules. What might I be missing, I'm wondering? Thanks for any help in this matter!
IOT device event twin change detect
What are the ways to catch IOT device event twin change in azure? I want to send notification or execute something like function app, when device twin event occur and reported property get change. I am using .net 8 and azure. let me know all possible ways. Thanks, Bhavin Bhesaniya.Problems with Edge Computing and Microsoft Azure IoT Edge. Any Advice?
Hi everyone, I'm currently experiencing some challenges with my edge computing setup and a Microsoft product. As someone relatively new to managing both hardware and software in this capacity, I could really use some advice from those more experienced. Here are the specifics of my setup: Edge Computing Setup: High-end CPUs, ample RAM, and SSD storage capacity. Microsoft Product: Microsoft Azure IoT Edge The Issues: Performance Challenges: The Microsoft Azure IoT Edge is not performing as expected with my edge computing setup, especially during high-traffic periods and intensive computational tasks. There are noticeable slowdowns and performance bottlenecks. Installation and Configuration Difficulties: During the setup of the Microsoft Azure IoT Edge with my edge computing infrastructure, I encountered several hurdles. While I managed to complete the installation, I suspect there may be lingering configuration issues affecting performance and usability. Integration and Compatibility Concerns: I'm facing compatibility issues with certain applications and third-party tools within the Microsoft Azure IoT Edge. These issues are disrupting workflows and reducing efficiency in system management. Steps Taken So Far: I've ensured that my hardware setup meets or exceeds the recommended specifications for the Microsoft Azure IoT Edge. I've followed the installation and setup documentation for the Microsoft Azure IoT Edge meticulously. I've reviewed and adjusted system configurations and resource allocations to optimize performance. Despite my efforts, the challenges persist. Have any of you encountered similar issues with Microsoft products in edge computing environments? Are there specific configurations, optimizations, or troubleshooting techniques you've found effective? Any advice, insights, or recommended resources would be greatly appreciated. Thank you in advance for your help!Azure Certified Device catalog gets a makeover!
You may have noticed that the Azure Certified Device catalog is looking a bit different lately -- we’re excited to share that the catalog has recently been updated to include a new landing page! Bringing you an enhanced search experience, the catalog landing page starts your customer journey with any information that you might need, including links to our certification requirements, shortcuts to pre-filtered views of our featured devices and solutions, and recent program announcements. The landing page is the first of many changes coming to the catalog to improve your experience on our page and help you get started building on Azure even faster than before. Let us know what you think of the new and improved catalog in the comments down below!
